Hydraulics
Hydraulics There are 181 products.
-
Enerpac RLT 110 Low height telescopic...
The Enerpac RLT 110 Low height 2 stage telescopic cylinder has a collapsed height of 54.5mm with the following capacities - Lower stage at 23.7 Tons with 11mm stroke and upper stage at 11.4 Tons with 7mm stroke.
-
Enerpac RCS502 Hydraulic cylinder
Low height, spring assisted return, single acting cylinder from the Enerpac RCS range with 435kN lifting capacity and 60mm stroke. The RCS502 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 373cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RC256 Hydraulic cylinder
General purpose, spring assisted return, single acting cylinder from the Enerpac “Duo” range with 232kN lifting capacity and 158mm stroke. The RC252 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 525cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RSM500 Hydraulic cylinder
Low height, spring assisted return, single acting cylinder from the Enerpac RSM range with 435kN lifting capacity and 16mm stroke. The RSM500 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 99cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac XA11 Air powered pump
The Enerpac XA11 is a single acting pump from their high performance range of air driven, hydraulic foot pumps. The pump has a working pressure of 700bar (10,000 psi) and a flow rate of 2.0 Litre per minute at no load and 0.25 Litres per minute at 700bar. Supplied complete with test certificate traceable to national standards.
-
Enerpac CUSP30 Ultra Flat Cylinder
The CUSP30 cylinder from Enerpac's new range of ultra flat cylinders produces 304kN of force @ 700 bar maximum working pressure and has a collapsed height of 43.5mm and a 6mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 502 High tonnage cylinder
The Enerpac HCG - 502 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 50mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac THQ706T
The Enerpac THQ706T hoses are twin safety hoses for use with the Enerpac range of torque pumps and torque wrenches and are 6 Metres in length.
-
Enerpac RLT 41 Low height telescopic cylinder
The Enerpac RLT41 Low height, 3 stage telescopic cylinder has a 54mm collapsed height with the following capacities - lower stage 23.7 Tons with 11mm stroke, second stage 11.4 Tons with 7mm stroke and upper stage 4.4 Tons with 5mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RCH202 Hydraulic cylinder
Hollow plunger, spring assisted return, single acting cylinder from the Enerpac RCH range with 215kN lifting capacity and 49mm stroke. The RCH202 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 150cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RAC202 Aluminium Cylinder
The Enerpac RAC202 has a capacity of 20t,a closed height of 174mm,an outside diameter of 85mm,a 50mm stroke and weighs only 3.6Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac XA12 Air powered pump
The Enerpac XA12 is a single acting pump from their high performance range of air driven, hydraulic foot pumps with a usable oil capacity of 2 Litres. The pump has a working pressure of 700bar (10,000 psi) and a flow rate of 2.0 Litre per minute at no load and 0.25 Litres per minute at 700bar. Supplied complete with test certificate traceable to...