Hydraulics
Hydraulics There are 181 products.
-
Enerpac RLT 40 Low height telescopic cylinder
The RLT40 2 stage, low height telescopic cylinder has a collapsed height of 45mm with the following capacities - Lower stage at 11.4 Tons with 11mm stroke and upper stage at 4.4 Tons with 6mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RSM300 Hydraulic cylinder
Low height, spring assisted return, single acting cylinder from the Enerpac RSM range with 295kN lifting capacity and 13mm stroke. The RSM300 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 55cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RCS302 Hydraulic cylinder
Low height, spring assisted return, single acting cylinder from the Enerpac RCS range with 295kN lifting capacity and 62mm stroke. The RCS302 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 261cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RC252 Hydraulic cylinder
General purpose, spring assisted return, single acting cylinder from the Enerpac “Duo” range with 232kN lifting capacity and 50mm stroke. The RC252 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 166cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac CUSP10 Ultra Flat Cylinder
The Enerpac CUSP10 is the lowest capacity cylinder available in their new range of ultra flat cylinders. Producing 95kN of force @ 700 bar maximum working pressure, this cylinder has a collapsed height of 35.5mm and a 6mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RC156 Hydraulic cylinder
General purpose, spring assisted return, single acting cylinder from the Enerpac “Duo” range with 142kN lifting capacity and 152mm stroke. The RC156 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 308cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac CULP50 Ultra Flat Cylinder
The Enerpac CULP50 produces 310kN of force has a collapsed height of 44.5mm and a 6mm stroke. We supply complete with short hose assembly and coupling to enable connection to customers high flow coupling. Supplied complete with test certificate traceable to national standards.
-
PH113C Hydraulic puller kit
The PH113C Pullers Set gives 15 tons of pulling force with a 229mm jaw reach and 280mm jaw spread coupled with an 80mm stroke. Ideal for pulling a wide range of press fitted parts including bushings, bearings, wheels, gears and pulleys. Supplied complete with test certificate traceable to national standards.
-
NC 1319 Enerpac hydraulic nut splitter 10...
The Enerpac NC 1319 Hydraulic nut splitter works at 700 bar and has a bolt range of M6 - M 12 and a hexagon nut range of 10 - 19mm. The unit produces 49kN of force and weighs just 1.2 Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac RC254 Hydraulic cylinder
General purpose, spring assisted return, single acting cylinder from the Enerpac “Duo” range with 232kN lifting capacity and 102mm stroke. The RC252 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 339cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac P80 Hydraulic hand pump
The Enerpac P80 is a two speed,steel hand pump from their "Ultima" range giving a reduced handle effort to reduce operator fatigue. The pump has a working pressure of 700bar (10,000 psi), delivers 16.39cm3 of oil and 2.46cm3 of oil per handle stroke on the first and second stage respectively and has 2200cm3 of usable oil. Supplied complete with test...
-
Enerpac CUSP20 Ultra Flat Cylinder
The Enerpac CUSP20 cylinder from Enerpac's new range of ultra flat cylinders produces 198kN of force @ 700 bar maximum working pressure. The cylinder has a collapsed height of 39mm and a 6mm stroke. Supplied complete with test certificate traceable to national standards.