Hydraulics
Hydraulics There are 181 products.
-
Enerpac JBI-10 Base Plate
The Enerpac JBI-10 Base Plate ensures stability for lifting applications by providing an enlarged surface area to spread the forces generated whilst operating the 10t range of cylinders. Suitable for the RC10 series of cylinders covering all stroke variations from 26mm to 356mm.
-
Enerpac LWB-1 Stepped block for use with LW16
The Enerpac LWB-1 stepped block can be used in conjunction with the LW-16 to increase the lifting height by 30mm.
-
Enerpac GA45GC Gauge and mounting block
The Enerpac GA45GC has a 45 degree angled gauge port for ease of viewing, comes complete with a 63mm diameter faced gauge which reads from zero to 700bar (10,000 psi). The unit is fitted with a female half coupling to facilitate connection of a hose that has a male coupling on each end.
-
Enerpac CT-604
The Enerpac CT-604 Safety tool is used to relieve back pressure by safely bleeding the hydraulic couplings. For use with the C- series of 700 bar high-flow couplings only.
-
Enerpac RSM50 Hydraulic cylinder
Low height, spring assisted return, single acting cylinder from the Enerpac RSM range with 45kN lifting capacity and 6mm stroke. The RSM50 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 4cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RC50 Hydraulic Cylinder
General purpose, single acting cylinder 45kN lifting capacity and 16mm stroke. Supplied complete with test certificates traceable to national standards.
-
Enerpac WR-5 Hydraulic wedge
The Enerpac WR-5 hydraulic wedge is for use in confined spaces has a 1 ton capacity and a maximum spread of 94mm. The unit has a maximum working pressure of 700 bar and weighs 2.3Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac CULP10 Ultra Flat Cylinder
The Enerpac CULP10 produces 97kN of force, has a collapsed height of 27.5mm and a 6mm stroke. We supply complete with short hose assembly and coupling to enable connection to customers high flow coupling. Supplied complete with test certificate traceable to national standards.
-
Enerpac JBI-25 Base Plate
The Enerpac JBI-25 Base Plate ensures stability for lifting applications by providing an enlarged surface area to spread the forces generated whilst operating the 25t range of cylinders. Suitable for the RC25 series of cylinders covering all stroke variations from 26mm to 362mm.
-
Enerpac JBI-50 Base Plate
The Enerpac JBI-50 Base Plate ensures stability for lifting applications by providing an enlarged surface area to spread the forces generated whilst operating the 50t range of cylinders. Suitable for the RC50 series of cylinders covering all stroke variations from 51mm to 337mm.
-
Enerpac RSM100 Hydraulic cylinder
Low height, spring assisted return, single acting cylinder from the Enerpac RSM range with 101kN lifting capacity and 11mm stroke. The RSM100 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 18cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RC53 Hydraulic cylinder
General purpose, spring assisted return, single acting cylinder from the Enerpac "Duo" range with 45kN lifting capacity and 76mm stroke. The RC53 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 50cm3. Supplied complete with test certificates traceable to national standards.