Cylinders There are 76 products.
-
Enerpac SCL201PGH Pump & Cylinder Set
The Enerpac SCL201PGH Pump & cylinder set comprises 20 ton low height cylinder with 45mm stroke, P392 two speed hand pump, gauge mounting block,gauge and high pressure hose assembly. Supplied complete with test certificate traceable to national standards.
-
Enerpac RCH306 Hydraulic cylinder
Hollow plunger, spring assisted return, single acting cylinder from the Enerpac RCH range with 326kN lifting capacity and 155mm stroke. The RCH306 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 722cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RC506 Hydraulic cylinder
General purpose, spring assisted return, single acting cylinder from the Enerpac “Duo” range with 498kN lifting capacity and 159mm stroke. The RC506 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 1131cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac SCR154PGH Pump & Cylinder Set
The Enerpac SCR154PGH Pump and cylinder set comprises a 15 ton capacity cylinder with 101mm stroke, P392 two speed hand pump, gauge mounting block, gauge and high pressure hose assembly. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 1006 High tonnage cylinder
The Enerpac HCG – 1006 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 150mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac SCR156PGH Pump & Cylinder Set
The Enerpac SCR156PGH Pump and cylinder set comprises a 15 ton capacity cylinder with 152mm stroke, P392 two speed hand pump, gauge, gauge mounting block and high pressure hose assembly. Supplied complete with test certificate traceable to national standards.
-
Enerpac CUSP100 Ultra Flat Cylinder
The CUSP100 cylinder from Enerpac's new range of ultra flat cylinders produces 1057kN of force @ 700 bar maximum working pressure, has a collapsed height of 63.5mm, a stroke of 10mm and a tilting capability of 4 degrees. Supplied complete with test certificate traceably to national standards.
-
Enerpac RR308 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 295kN pushing / lifting capacity,53kN pulling force with 209mm stroke. The RR308 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 879cm3 on the push side and 400cm3 on the pull side. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 1008 High tonnage cylinder
The Enerpac HCG – 1008 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 200mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RLT 501 Low height telescopic...
The Enerpac RLT501 2 stage, low height telescopic cylinder has a collapsed height of 96mm and the following capacities - lower stage at 94.7 ton with 16mm stroke and second stage at 50.6 ton with 10mm stroke. Supplied with test certificate traceable to national standards.
-
Enerpac RCH603 Hydraulic cylinder
Hollow plunger, spring assisted return, single acting cylinder from the Enerpac RCH range with 576kN lifting capacity and 76mm stroke. The RCH603 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 626cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RLT 231 Low height telescopic...
The Enerpac RLT231, 3 stage Low height telescopic cylinder has a collapsed height of 96mm with the following capacities - Lower stage 94.7 ton with 16mm stroke, second stage at 50.6 ton with 10mm stroke and upper stage at 23.7 ton with 6mm stroke. Supplied complete with test certificate traceable to national standards.