Cylinders There are 76 products.
-
Enerpac HCG - 5010High tonnage cylinder
The Enerpac HCG – 5010 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 250mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RCH206 Hydraulic cylinder
Hollow plunger, spring assisted return, single acting cylinder from the Enerpac RCH range with 215kN lifting capacity and 155mm stroke. The RCH206 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 476cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 1002High tonnage cylinder
The Enerpac HCG – 1002 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 50mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac SCL101PGH Pump & Cylinder Set
The Enerpac SCL101PGH Pump and cylinder set comprises a 10 ton low height cylinder with 38mm stroke, P392 two speed hand pump, gauge mounting block, gauge and high pressure hose assembly. Supplied complete with test certificate traceable to national standards.
-
Enerpac SCR102PGH Pump & Cylinder Set
The Enerpac SCR102PGH Pump and cylinder set comprises a 10 ton capacity cylinder with 54mm stroke, P392 two speed hand pump, gauge mounting block, gauge and high pressure hose assembly. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 5012High tonnage cylinder
The Enerpac HCG – 5012 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 300mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac CUSP75 Ultra Flat Cylinder
The CUSP75 cylinder from Enerpac's new range of ultra flat cylinders produces 777kN of force @ 700 bar maximum working pressure, has a collapsed height of 60.5mm, a stroke of 10mm and a tilting capability of +/- 4 degrees. Supplied complete with a test certificate traceable to national standards.
-
Enerpac RR1010 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 101kN pushing / lifting capacity,33kN pulling force with 254mm stroke. The RR1010 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 368cm3 on the push side and 122cm3 on the pull side. Supplied complete with test certificate traceable to national standards.
-
Enerpac RLT 311 Low height telescopic...
The Enerpac RLT311, 2 stage low height telescopic cylinder has a collapsed height of 89mm with the following capacities - Lower stage at 74.1 ton with 16mm stroke and second stage at 31.5 ton with 13mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RLT 111 Low height telescopic...
The Enerpac RLT111, 3 stage Low height telescopic cylinder has a collapsed height of 89mm with the following capacities - Lower stage at 74.1 Tons with 16mm stroke, second stage at 31.5 Tons with 13mm stroke and upper stage at 11.4 Tons with 11mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 1004 High tonnage cylinder
The Enerpac HCG – 1004 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 100mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac SCR106PGH
The Enerpac SCR106PGH pump and cylinder kit comprises of the P392 Two speed hand pump, the RC106 10 tonne capacity cylinder, gauge mounting block, gauge and high pressure hose assembly. Supplied with test certificate traceable to national standards.