Categories
Manufacturers
Suppliers
- Fashion Supplier
List of products by manufacturer Enerpac
-
Enerpac RCH206 Hydraulic cylinder
Hollow plunger, spring assisted return, single acting cylinder from the Enerpac RCH range with 215kN lifting capacity and 155mm stroke. The RCH206 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 476cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 1002High tonnage cylinder
The Enerpac HCG – 1002 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 50mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac THQ712T
The Enerpac THQ712T twin safety hoses are for use with the Enerpac range of torque pumps and torque wrenches and are 12 Meters in length.
-
Enerpac XA11V Air powered pump
The Enerpac XA11V is a double acting pump from their high performance range of air driven, hydraulic foot pumps. The pump has a working pressure of 700bar (10,000 psi) and a flow rate of 1.0 Litre per minute at no load and 0.25 Litres per minute at 700bar. Supplied complete with test certificate traceable to national standards.
-
Enerpac SCL101PGH Pump & Cylinder Set
The Enerpac SCL101PGH Pump and cylinder set comprises a 10 ton low height cylinder with 38mm stroke, P392 two speed hand pump, gauge mounting block, gauge and high pressure hose assembly. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 5012High tonnage cylinder
The Enerpac HCG – 5012 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 300mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac SCR102PGH Pump & Cylinder Set
The Enerpac SCR102PGH Pump and cylinder set comprises a 10 ton capacity cylinder with 54mm stroke, P392 two speed hand pump, gauge mounting block, gauge and high pressure hose assembly. Supplied complete with test certificate traceable to national standards.
-
Enerpac RAC304 Aluminium Cylinder
The Enerpac RAC304 has a capacity of 30t,a closed height of 231mm,a 100mm stroke,an outside diameter of 100mm and weighs only 5.2Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac CUSP75 Ultra Flat Cylinder
The CUSP75 cylinder from Enerpac's new range of ultra flat cylinders produces 777kN of force @ 700 bar maximum working pressure, has a collapsed height of 60.5mm, a stroke of 10mm and a tilting capability of +/- 4 degrees. Supplied complete with a test certificate traceable to national standards.
-
Enerpac RR1010 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 101kN pushing / lifting capacity,33kN pulling force with 254mm stroke. The RR1010 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 368cm3 on the push side and 122cm3 on the pull side. Supplied complete with test certificate traceable to national standards.
-
Enerpac RLT 311 Low height telescopic...
The Enerpac RLT311, 2 stage low height telescopic cylinder has a collapsed height of 89mm with the following capacities - Lower stage at 74.1 ton with 16mm stroke and second stage at 31.5 ton with 13mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac XA12V Air powered pump
The Enerpac XA12V is a double acting pump from their high performance range of air driven, hydraulic foot pumps. The pump has a working pressure of 700bar (10,000 psi) and a flow rate of 1.0 Litre per minute at no load and 0.25 Litres per minute at 700bar. Supplied complete with test certificate traceable to national standards.