Categories
Manufacturers
Suppliers
- Fashion Supplier
List of products by manufacturer Enerpac
-
Enerpac FZ1617 Male / Male nipple
The Enerpac FZ1617 is a male / male nipple which has a maximum working pressure of 700 bar and two off 3/8" NPT male threads.
-
Enerpac CH604 Male half coupling
The Enerpac CH604 is a male half coupling (usually attached to the hose) and is rated at 700 bar and has a 3/8 NPT female thread.
-
Enerpac FZ1612 Female / Female Tee
The Enerpac FZ1612 is a female tee with a maximum working pressure of 700 bar and three off 3/8" NPT female ports.
-
Enerpac FZ1616 Male / Female elbow
The Enerpac FZ1616 is a street elbow rated at 700 bar maximum working pressure and has one 3/8" NPT male thread and one 3/8" NPT female thread.
-
Enerpac CR400 Female half coupling
The Enerpac CR400 is the female half coupling (usually attached to the cylinder) and has a maximum working pressure of 700 bar and a 3/8" NPT male thread.
-
Enerpac GA2 Gauge mounting block
The Enerpac GA2 Gauge mounting block has a 3/8" NPT Male thread for connecting directly into the pump outlet port, a female 3/8" NPT thread to facilitate direct connection of a hose and a 1/2" NPT female port to allow direct connection of the pressure gauge.
-
Enerpac C604 Complete coupling
The Enerpac C604 is a complete coupling (male and female half) rated at 700 bar maximum working pressure and has 3/8 NPT threads.
-
Enerpac FZ1660 Swivel connector
The Enerpac FZ1660 is rated at 700 bar maximum working pressure and has a fixed 3/8" NPT male thread and a 3/8" NPT female swivel thread.
-
Enerpac HC7203 Hose and coupling
The Enerpac HC7203 - 700 series, high pressure thermoplastic hose assembly is 0.9 metre in length and has a standard CH604 male coupling on one end and a 3/8” NPT male thread on the other, this allows the hose to be screwed directly into the gauge block or into the pumps outlet port.
-
Enerpac HC7206 Hose and coupling
The Enerpac HC7206 - 700 series, high pressure thermoplastic hose assembly is 1.8 metre in length and has a standard CH604 male coupling on one end and a 3/8” NPT male thread on the other, this allows the hose to be screwed directly into the gauge block or into the pumps outlet port.
-
Enerpac HC7210 Hose and coupling
The Enerpac HC7206 - 700 series, high pressure thermoplastic hose assembly is 1.8 metre in length and has a standard CH604 male coupling on one end and a 3/8” NPT male thread on the other, this allows the hose to be screwed directly into the gauge block or into the pumps outlet port.
-
Enerpac GP10S Pressure gauge
The Enerpac GP10S has a 100mm diameter face and reads from zero to 700bar (10,000 psi) in 10bar (100 psi) increments and has a 1/2"NPT bottom entry male connection.