Accessories
Accessories There are 18 products.
-
Enerpac FZ1617 Male / Male nipple
The Enerpac FZ1617 is a male / male nipple which has a maximum working pressure of 700 bar and two off 3/8" NPT male threads.
-
Enerpac CH604 Male half coupling
The Enerpac CH604 is a male half coupling (usually attached to the hose) and is rated at 700 bar and has a 3/8 NPT female thread.
-
Enerpac FZ1612 Female / Female Tee
The Enerpac FZ1612 is a female tee with a maximum working pressure of 700 bar and three off 3/8" NPT female ports.
-
Enerpac FZ1616 Male / Female elbow
The Enerpac FZ1616 is a street elbow rated at 700 bar maximum working pressure and has one 3/8" NPT male thread and one 3/8" NPT female thread.
-
Enerpac CR400 Female half coupling
The Enerpac CR400 is the female half coupling (usually attached to the cylinder) and has a maximum working pressure of 700 bar and a 3/8" NPT male thread.
-
Enerpac GA2 Gauge mounting block
The Enerpac GA2 Gauge mounting block has a 3/8" NPT Male thread for connecting directly into the pump outlet port, a female 3/8" NPT thread to facilitate direct connection of a hose and a 1/2" NPT female port to allow direct connection of the pressure gauge.
-
Enerpac FZ1660 Swivel connector
The Enerpac FZ1660 is rated at 700 bar maximum working pressure and has a fixed 3/8" NPT male thread and a 3/8" NPT female swivel thread.
-
Enerpac HC7203 Hose and coupling
The Enerpac HC7203 - 700 series, high pressure thermoplastic hose assembly is 0.9 metre in length and has a standard CH604 male coupling on one end and a 3/8” NPT male thread on the other, this allows the hose to be screwed directly into the gauge block or into the pumps outlet port.
-
Enerpac HC7206 Hose and coupling
The Enerpac HC7206 - 700 series, high pressure thermoplastic hose assembly is 1.8 metre in length and has a standard CH604 male coupling on one end and a 3/8” NPT male thread on the other, this allows the hose to be screwed directly into the gauge block or into the pumps outlet port.
-
Enerpac HC7210 Hose and coupling
The Enerpac HC7206 - 700 series, high pressure thermoplastic hose assembly is 1.8 metre in length and has a standard CH604 male coupling on one end and a 3/8” NPT male thread on the other, this allows the hose to be screwed directly into the gauge block or into the pumps outlet port.
-
Enerpac GP10S Pressure gauge
The Enerpac GP10S has a 100mm diameter face and reads from zero to 700bar (10,000 psi) in 10bar (100 psi) increments and has a 1/2"NPT bottom entry male connection.
-
Enerpac JBI-10 Base Plate
The Enerpac JBI-10 Base Plate ensures stability for lifting applications by providing an enlarged surface area to spread the forces generated whilst operating the 10t range of cylinders. Suitable for the RC10 series of cylinders covering all stroke variations from 26mm to 356mm.