Cylinders There are 76 products.
-
Enerpac RC5013 Hydraulic cylinder
General purpose, spring assisted return, single acting cylinder from the Enerpac “Duo” range with 498kN lifting capacity and 337mm stroke. The RC506 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 2399cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 10010 High tonnage cylinder
The Enerpac HCG – 10010 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 250mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RR506 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 498kN pushing / lifting capacity, 103kN pulling force with 156mm stroke. The RR506 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 1111cm3 on the push side and 335cm3 on the pull side. Supplied complete with test certificate traceable to national standards.
-
Enerpac CUSP150 Ultra Flat Cylinder
The CUSP150 cylinder form Enerpac's new range of ultra flat cylinders produces 1589kN of force @ 700 bar maximum working pressure, this cylinder has a collapsed height of 65mm, a 10mm stroke and a tilting capability of +/- 3 degrees. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 10012 High tonnage cylinder
The Enerpac HCG – 10012 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 300mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RT1510 Telescopic Cylinder
The Enerpac RT1510 is a multi stage, single acting load return cylinder with a closed height of 283mm and an outside diameter of 110mm. Supplied complete with a test certificate traceable to national standards.
-
Enerpac RLT 741 Low height telescopic...
The Enerpac RLT741 2 stage, low height telescopic cylinder has a collapsed height of 114mm with the following capacities - lower stage at 143.5 ton with 16mm stroke and second stage at 74.1 ton with 10mm stroke. Supplied with test certificate traceable to national standards.
-
Enerpac RR5013 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 498kN pushing / lifting capacity, 103kN pulling force with 334mm stroke. The RR5013 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 2378cm3 on the push side and 718cm3 on the pull side. Supplied complete with test certificate traceable to national standards.
-
Enerpac RC1006 Hydraulic cylinder
General purpose, spring assisted return, single acting cylinder from the Enerpac “Duo” range with 933kN lifting capacity and 168mm stroke. The RC1006 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 2239cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RT 2111 Telescopic Cylinder
The Enerpac RT2111 2 stage, telescopic cylinder has a collapsed height of 317mm with the following capacities - Lower stage at 51 ton with 150mm stroke and second stage at 20 ton with 150mm stroke. Supplied complete with test certificate traceable to national standard.
-
Enerpac RT 1817 Telescopic Cylinder
The Enerpac RT1817 is a multi stage, telescopic cylinder with a closed height of 345mm, an outside diameter of 170mm and an oil capacity of 3092cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RR1006 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 933kN pushing / lifting capacity, 435kN pulling force with 168mm stroke. The RR1006 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 2238cm3 on the push side and 1045cm3 on the pull side. Supplied complete with test certificate traceable to national standards.