Hydraulics
Hydraulics There are 181 products.
-
Enerpac WR-15 Hydraulic wedge
The Enerpac WR-15 is a hydraulic wedge with a 0.75 ton capacity and a maximum spread of 292mm. The unit has a maximum working pressure of 700 bar and weighs 11.3Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 504 High tonnage cylinder
The Enerpac HCG – 504 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 100mm stroke. Supplied complete with test certificate traceable to national standards.
-
FA1TMSTD Equalizer Flange Alignment Tool
The Equalizer FA1TMSTD Manual flange aligner provides a force of 10kN (1T) has a minimum bolt diameter of 16.0mm (0.63"), a maximum aligning distance of 26.0mm (1.02") and weighs 1.6Kgs (3.5lbs).
-
Enerpac P801 Hydraulic hand pump
The Enerpac P801 is a two speed, steel hand pump from their "Ultima" range giving a reduced handle effort to reduce operator fatigue. The pump has a working pressure of 700bar (10,000 psi), delivers 16.39cm3 of oil and 2.46cm3 of oil per handle stroke on the first & second stage respectively and has 4100cm3 of usable oil. Supplied complete with test...
-
Enerpac RCH302 Hydraulic cylinder
Hollow plunger, spring assisted return, single acting cylinder from the Enerpac RCH range with 326kN lifting capacity and 64mm stroke. The RCH302 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 298cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 506 High tonnage cylinder
The Enerpac HCG – 506 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 150mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RAC204 Aluminium Cylinder
The Enerpac RAC204 has a capacity of 20t, a closed height of 224mm,an outside diameter of 85mm,a 100mm stroke and weighs only 4.1Kgs. Suppled complete with test certificate traceable to national standards.
-
Enerpac RLT 230 Low height telescopic...
The Enerpac RLT230 Low height,2 stage telescopic cylinder has a collapsed height at 75mm with the following capacities - Lower stage at 50.6 Ton with 16mm stroke and a second stage at 23.7 Tons with 11mm stroke. Supplied complete with test certificate traceable to national standards.
-
Eerpac XA11G Air powered pump
The Enerpac XA11G is a single acting pump from their high performance range of air driven, hydraulic foot pumps complete with integral pressure gauge. The pump has a working pressure of 700bar (10,000 psi) and a flow rate of 2.0 Litre per minute at no load and 0.25 Litres per minute at 700bar. Supplied complete with test certificate traceable to...
-
Enerpac VLP106P142 Hydraulic bench press
The Enerpac VLP106P142 hydraulic press comes complete with ten ton capacity, 150mm stroke cylinder and two speed hand pump. Supplied complete with test certificate traceable to national standards.
-
Enerpac CUSP50 Ultra Flat Cylinder
The CUSP50 cylinder from Enerpac's new range of ultra flat cylinders produces 539kN of force @ 700 bar maximum working pressure. The cylinder has a collapsed height of 58mm and a 10mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 508 High tonnage cylinder
The Enerpac HCG – 508 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 2000mm stroke. Supplied complete with test certificate traceable to national standards.