Hydraulics
Hydraulics There are 181 products.
-
FA9TE Equalizer Flange Alignment Tool
The Equalizer FA9TE Hydraulic linear and rotational flange alignment tool has an alignment force of 90kN (9T) with 700 bar (10,000 psi) applied hydraulic pressure. The tool requires a minimum bolt hole diameter of 35.5mm (1.40") has a maximum wing reach of 240.0mm (9.45") and weighs 14.5Kgs (32.0lbs).
-
Enerpac ZC3308JB Cordless hydraulic pump
The Enerpac ZC3308JB Cordless hydraulic pump has a 3 way valve for single acting operation, a 110 Volt charger, 6.6 Litre usable oil reservoir and weighs 29.7 Kgs. The unit provides output flow rates of 5.0 Litres per minute < 70 bar, 1.3 Litres per minute < 275 bar and 0.52 Litre per minute < 700 bar.
-
Enerpac ZC3308JE Cordless hydraulic pump
The Enerpac ZC3308JE Cordless hydraulic pump has a 3 way valve for single acting operation, a 240 Volt charger, 6.6 Litre usable oil reservoir and weighs 29.7 Kgs. The unit provides output flow rates of 5.0 litres per minute < 70 bar, 1.3 litres per minute < 275 bar and 0.52 litres per minute < 70 bar.
-
Enerpac ZC3408JB Cordless hydraulic pump
The Enerpac ZC3408JB Cordless hydraulic pump has a 4 way valve for double acting operation, a 110 Volt charger, 6.6 Litre usable oil reservoir and weighs 29.7 Kgs. The unit provides output flow rates of 5.0 Litres per minute < 70 bar, 1.3 Litres per minute < 275 bar and 0.52 Litres per minute < 700 bar.
-
Enerpac ZC3408JE Cordless hydraulic pump
The Enerpac ZC3408JE has a 3 way valve for single acting operation, a 240 volt charger,6.6 litre usable oil reservoir and weighs 29.7 kgs. The unit provides output flow rates of 5.0 Litres per minute < 70 bar, 1.3 litres per minute < 275 bar and 0.52 litres per minute at < 700 bar.
-
Enerpac S3000X Torque Wrench
The Enerpac S1500X is a 1” Square drive hydraulic torque wrench with a minimum torque @69bar of 438Nm (323Ft/Lbs) and a nominal maximum torque @690bar of 4373Nm (3225ft/Lbs). All X Edition torque tools are CE –ATEX declared and are shipped complete with calibration certificates.
-
Enerpac RT 3323 Telescopic Cylinder
The Enerpac RT3323 3 stage, telescopic cylinder has a collapsed height at 476mm with the following capacities - lower stage at 202 ton with 200mm stroke, second stage at 81 ton with 200mm stroke and upper stage at 32 ton with 200mm stroke. Supplied complete with test certificate traceable to national standards.
-
NC 6075 Enerpac hydraulic nut splitter 60...
The Enerpac NC 6075 Hydraulic nut splitter works at 700 bar and has a bolt range of M39 - M 48 and a hexagon nut range of 60 - 75mm. The unit produces 882kN of force and weighs 34.1 Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac S6000X Torque Wrench
The Enerpac S1500X is a 1,1/2” Square drive hydraulic torque wrench with a minimum torque @69bar of 834Nm (615Ft/Lbs) and a nominal maximum torque @690bar of 8338Nm (6150ft/Lbs). All X Edition torque tools are CE –ATEX declared and are shipped complete with calibration certificates.
-
Enerpac ZU4204BB-Q Torque Pump
The Enerpac ZU4204BB-Q Torque pump is a 110 Volt single phase unit from the classic range has a 4 Litre usable oil reservoir and analogue pressure gauge. Supplied complete with test certificate traceable to national standards.
-
Enerpac ZU4208BB-Q Torque Pump
The Enerpac ZU4208BB-Q Torque pump is a 100 Volts single phase unit from the classic range has an 8 litre usable oil reservoir and an analogue pressure gauge. Supplied complete with test certificate traceable to national standards.
-
Enerpac S11000X Torque Wrench
The Enerpac S1500X is a 1,1/2” Square drive hydraulic torque wrench with a minimum torque @69bar of 1516Nm (1118Ft/Lbs) and a nominal maximum torque @690bar of 15,151Nm (11,175ft/Lbs). All X Edition torque tools are CE –ATEX declared and are shipped complete with calibration certificates.