Hydraulics
Hydraulics There are 181 products.
-
Enerpac XC-1201ME Battery powered pump
The Enerpac XC-1201ME is a single acting pump from their cordless range of battery pumps giving a no load flow rate of 2.0 litres per minute and a flow rate at 700 bar of 0.25litres per minute. The pump is supplied with two batteries and a 240 Volt charger and has a usable oil capacity of 1 Litre. Supplied complete with test certificate traceable to...
-
Enerpac XC - 1202MB Battery powered pump
The Enerpac XC-1202MB is a single acting pump from their cordless range of battery pumps giving a no load flow rate of 2.0 litres per minute and a flow rate at 700 bar of 0.25litres per minute. The pump is supplied with two batteries and a 110 Volt charger and has a usable oil capacity of 2 litres. Supplied complete with test certificate traceable to...
-
Enerpac XC - 1202ME Battery powered pump
The Enerpac XC-1202ME is a single acting pump from their cordless range of battery pumps giving a no load flow rate of 2.0 litres per minute and a flow rate at 700 bar of 0.25litres per minute. The pump is supplied with two batteries and a 240 Volt charger and has a usable oil capacity of 2 Litres Supplied complete with test certificate traceable to...
-
Enerpac RR5013 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 498kN pushing / lifting capacity, 103kN pulling force with 334mm stroke. The RR5013 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 2378cm3 on the push side and 718cm3 on the pull side. Supplied complete with test certificate traceable to national standards.
-
Enerpac PAM - 1041 Air Hydraulic Pump
The Enerpac PAM - 1041 is configured for double acting operation with the manual valve providing advance / hold / retract functions. Mounted on a 2.6 Litre usable oil reservoir and with a twin air motor configuration for high flow rates. Supplied complete with test certificate traceable to national standards.
-
Enerpac PUD-1100E Electric pump
This Enerpac economy range electric pump has a dump valve which provides advance and retract facilities on single acting cylinders (no load holding feature). The unit is 240 Volt supply and is mounted on a 1.9 Litre usable oil reservoir. Supplied complete with test certificate traceable to national standards and PAT test certificate.
-
Enerpac PUD-1100B Electric pump
This Enerpac economy range pump has a dump valve which provides advance and retract facilities on single acting cylinders (no load holding feature). The unit is 240 Volt supply and is mounted on a 1.9 Litre usable oil reservoir. Supplied complete with test certificate traceable to national standards and PAT test certificate.
-
Enerpac SLW16PGH
The Enerpac SLW16PGH lifting wedge set has a capacity of 157kN and a 21mm stroke. The set comes complete and ready to use comprising lifting wedge, 2 speed lightweight hand pump, gauge adaptor assembly and 1.8 Metre high pressure hose assembly. Supplied in an easy to carry sturdy toolbox.
-
Enerpac PUD-1101E Electric pump
This Enerpac economy range pump has a dump valve which provides advance and retract facilities on single acting cylinders (no load holding feature). The unit is 240 Volt supply and is mounted on a 3.8 Litre usable oil reservoir. Supplied complete with test certificate traceable to national standards and PAT test certificate.
-
Enerpac PUD-1101B Electric pump
This Enerpac economy range pump has a dump valve which provides advance and retract facilities on single acting cylinders (no load holding feature). The unit is 110 Volt supply and is mounted on a 3.8 Litre usable oil reservoir. Supplied complete with test certificate traceable to national standards and PAT test certificate.
-
Enerpac PAM - 1042 Air Hydraulic Pump
The Enerpac PAM - 1042 Air hydraulic Pump is configured for double acting operation with the manual valve providing advance / hold / retract functions. Mounted on a 7.6 Litre usable oil reservoir and with a twin air motor configuration for high flow rates. Supplied complete with test certificate traceable to national standards.
-
FA4TMSTD Equalizer Flange Alignment Tool
The Equalizer FA4TMSTD Mechanical linear and rotational flange alignment tool has an aligning force of 40kN (4T) with an applied torque of 68Nm (50 ft/lbs). The tool has a minimum hole diameter of 25.0mm (1.00") a maximum wing reach of 158.0mm (6.22") and weighs 8.6Kgs (19.0lbs).