Hydraulics
Hydraulics There are 181 products.
-
Enerpac CUSP150 Ultra Flat Cylinder
The CUSP150 cylinder form Enerpac's new range of ultra flat cylinders produces 1589kN of force @ 700 bar maximum working pressure, this cylinder has a collapsed height of 65mm, a 10mm stroke and a tilting capability of +/- 3 degrees. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 10012 High tonnage cylinder
The Enerpac HCG – 10012 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 300mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RT1510 Telescopic Cylinder
The Enerpac RT1510 is a multi stage, single acting load return cylinder with a closed height of 283mm and an outside diameter of 110mm. Supplied complete with a test certificate traceable to national standards.
-
Enerpac RLT 741 Low height telescopic...
The Enerpac RLT741 2 stage, low height telescopic cylinder has a collapsed height of 114mm with the following capacities - lower stage at 143.5 ton with 16mm stroke and second stage at 74.1 ton with 10mm stroke. Supplied with test certificate traceable to national standards.
-
Enerpac PAM - 1021 Air Hydraulic Pump
The Enerpac PAM - 1021 Air Hydraulic Pump is configured for single acting operation with the manual valve providing advance / hold / retract functions. Mounted on a 2.6 Litres usable oil reservoir and a with twin air motor configuration for high flow rates. Supplied complete with test certificate traceable to national standards.
-
Enerpac PUJ-1200E Electric pump
This Enerpac economy range pump has a manual valve which provides advance, hold and retract facilities on single acting cylinders or tools. The unit is 240 Volt supply and is mounted on a 1.9 Litre usable oil reservoir. Supplied complete with test certificate traceable to national standards and PAT test certificate.
-
Enerpac PUJ-1200B Electric pump
This Enerpac economy range pump has a manual valve which provides advance , hold and retract facilities on single acting cylinders and tools. The unit is 110 Volt supply and is mounted on a 1.9 Litre usable oil reservoir. Supplied complete with test certificate traceable to national standards and PAT test certificate.
-
Enerpac PUJ-1201E Electric pump
This Enerpac economy range pump has a manual valve which provides advance , hold and retract facilities on single acting cylinders and tools. The unit is 240 Volt supply and is mounted on a 3.8 Litre usable oil reservoir. Supplied complete with test certificate traceable to national standards and PAT test certificate.
-
Enerpac PUJ-1201B Electric pump
This Enerpac economy range pump has a manual valve which provides advance , hold and retract facilities on single acting cylinders and tools. The unit is 110 Volt supply and is mounted on a 3.8 Litre usable oil reservoir. Supplied complete with test certificate traceable to national standards and PAT test certificate.
-
Enerpac PAM - 1022 Air Hydraulic Pump
The Enerpac PAM - 1022 is configured for single acting operation with the manual valve providing advance / hold / retract functions. Mounted on a 7.6 Litre usable oil reservoir and with twin air motor configuration for high flow rates. Supplied complete with test certificate traceable to national standards.
-
NC 3241 Enerpac hydraulic nut spltter 32 -...
The Enerpac NC 3241 Hydraulic nut splitter works at 700 bar and has a bolt range of M22 - M27 and a hexagon nut range of 32 - 41mm. The unit produces 196kN of force and weighs just 4.4 Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac XC-1201MB Battery powered pump
The Enerpac XC-1201MB is a single acting pump from their cordless range of battery pumps giving a no load flow rate of 2.0 litres per minute and a flow rate at 700 bar of 0.25litres per minute. The pump is supplied with two batteries and a 110 Volt charger and has a usable oil capacity of 1 Litre. Supplied complete with test certificate traceable to...