Hydraulics
Hydraulics There are 181 products.
-
Enerpac P462 Hydraulic hand pump
The Enerpac P462 is a two speed, steel hand pump with high flow rates and large reservoir. The pump has a working pressure of 700bar (10,000 psi), delivers 126.20cm3 of oil and 4.75cm3 of oil per handle stoke on the first and second stage respectively and has 7423cm3 of usable oil. Supplied complete with test certificate traceable to national standards
-
Enerpac SOH-23-6 Machinery lifting jacks
The Enerpac SOH-23-6 has a capacity of 178kN and a stroke of 157mm. Designed to lift heavy equipment where space is limited the unit is ideal for machinery moving. Supplied complete with test certificate traceable to national standards.
-
Enerpac RR308 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 295kN pushing / lifting capacity,53kN pulling force with 209mm stroke. The RR308 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 879cm3 on the push side and 400cm3 on the pull side. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 1008 High tonnage cylinder
The Enerpac HCG – 1008 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 200mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RLT 501 Low height telescopic...
The Enerpac RLT501 2 stage, low height telescopic cylinder has a collapsed height of 96mm and the following capacities - lower stage at 94.7 ton with 16mm stroke and second stage at 50.6 ton with 10mm stroke. Supplied with test certificate traceable to national standards.
-
Enerpac LW-16 Hydraulic wedge
The Enerpac LW-16 vertical lifting wedge has a lifting force of 16 tons, a maximum stroke of 21mm and a tip clearance of 10mm. The unit has a maximum working pressure of 700 bar and weighs 9.0Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac RCH603 Hydraulic cylinder
Hollow plunger, spring assisted return, single acting cylinder from the Enerpac RCH range with 576kN lifting capacity and 76mm stroke. The RCH603 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 626cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RLT 231 Low height telescopic...
The Enerpac RLT231, 3 stage Low height telescopic cylinder has a collapsed height of 96mm with the following capacities - Lower stage 94.7 ton with 16mm stroke, second stage at 50.6 ton with 10mm stroke and upper stage at 23.7 ton with 6mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RC5013 Hydraulic cylinder
General purpose, spring assisted return, single acting cylinder from the Enerpac “Duo” range with 498kN lifting capacity and 337mm stroke. The RC506 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 2399cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 10010 High tonnage cylinder
The Enerpac HCG – 10010 High tonnage cylinder is single acting, load return with a 100 ton lifting capacity and a 250mm stroke. Supplied complete with test certificate traceable to national standards.
-
NC 2432 Enerpac hydraulic nut splitter 24...
The Enerpac NC 2432 Hydraulic nut splitter works at 700 bar and has a bolt range of M16 - M22 and a hexagon nut range of 24 - 32mm. The unit produces 147kN of force and weighs just 3.0 Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac RR506 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 498kN pushing / lifting capacity, 103kN pulling force with 156mm stroke. The RR506 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 1111cm3 on the push side and 335cm3 on the pull side. Supplied complete with test certificate traceable to national standards.